52 ERROR

52.00 ERROR
A scanner motor error has occurred. Scanner motor rotation is verified at the initialization of
a print job.
1. Verify that the scanner motor connector and the ribbon cable from the ECU are firmly seated on the laser/scanner assembly.
2. Verify that the scanner motor connector is firmly seated in connector J402 on the ECU. You might have to remove the main cooling fan to see this connection.
3. Verify that the ribbon cable installed in connector J403 on the ECU is fully seated. You must remove the ECU in order to verify this connection.
4. If the message persists, replace the laser/scanner assembly

 

Posted with Blogsy