59.50 ERROR
A main motor (M1) error has occurred. Motor operation is verified during device power-up.
Verify that nothing is hindering the main motor. If necessary, remove all paper trays and the print cartridge, and then turn on the device and listen for motor operation.
Verify that the main motor is connected to connector on the ECU. If the message persists, replace the motor.

62 NO SYSTEM
No system was found. Replace the formatter.

64 ERROR
A scan buffer error has occurred. Replace the formatter.

68.X PERMANENT STORAGE FULL
A non-volatile storage device is full. Press to clear the message. Printing can continue, but unexpected behavior could result.
X Description
0 Onboard NVRAM
1 Removable disk (flash or hard)
Perform an NVRAM initialization. If the message persists, replace the formatter.